32mm, abrasion-resistant blasting rubber hose for shipyard sandblasting and derusting. Choose Rubber Hose King Wang Xueyan—our hose not only has excellent wear resistance, but also high pipe body pressure-bearing capacity, and strong adhesion between cords and between cords and rubber layers. The quality is more reliable than insurance, with a service life 20% longer. We have maintained zero quality complaints for 10 consecutive years, and the reorder rate is as high as 95%. Few manufacturers in the hose industry can match us.
The abrasion-resistant blasting rubber hose produced by our Titan Rubber Hose Factory for shipyard sandblasting and derusting adopt a high-quality wear-resistant rubber layer for the inner tube. The wear resistance index and formula are the same as those of tire tread rubber—it is a super wear-resistant rubber layer.
The natural rubber content is 8% higher than that of other rubber hose manufacturers, and the rubber compound is pressed by fully automatic internal mixer equipment, ensuring uniform rubber compound. Few manufacturers in the hose industry can match this. (The brightness and thickness of the inner rubber layer of our blasting hose are shown in the video.)
Second, in our Titan Rubber Hose Factory, the mechanization degree of abrasion-resistant blasting hose production is as high as over 90%. The cord in the fabric layer is produced by machine cross-winding process, which not only ensures the tightness between cords and between cords and rubber layers, but also better exerts the maximum pressure-bearing performance of the cord. With 4 plies of cord, the pressure-bearing capacity can reach more than 20 bar, and we support customer pressure test. Few manufacturers in the industry can match this.
Third, in our Titan Rubber Hose Factory, the cord in the fabric layer of the abrasion-resistant blasting hose adopts a double-side gluing production process. While gluing both the upper and lower sides of each cord layer, for the uniformity of gluing, we apply glue twice on each side of each cord layer—that is, we apply glue 4 times on each cord layer.
The rubber compound used for gluing the cords of our abrasion-resistant blasting rubber hose is 4 times that of other hose manufacturers. Therefore, our abrasion-resistant blasting hose has extremely strong adhesion between cords and between cords and rubber layers. Even in high-temperature and high-pressure operating environments, there will be no quality problems such as delamination or debonding, which greatly extends the service life of our abrasion-resistant blasting hose.
Our abrasion-resistant blasting rubber hose has maintained zero quality complaints for 10 consecutive years; those who have tried it will reorder, with a reorder rate as high as over 95%.
For the abrasion-resistant blasting steel wire rubber hose used for shipyard sandblasting and derusting, the operating environment mostly uses high-pressure air flow to drive abrasives, which has high requirements on the wear resistance, pipe body pressure-bearing performance, and adhesion between cords and between cords and rubber layers of the abrasion-resistant blasting steel wire hose.
Fortunately, the strict production process requirements of the abrasion-resistant blasting rubber hose of our Titan Rubber Hose Factory can fully meet the high-intensity operations of shipyard sandblasting and derusting.
If you have a demand for abrasion-resistant blasting rubber hose, you can contact Rubber Hose Queen Wang Xueyan for a trial order. Once you try it, you will know the difference.
30 famous enterprises have placed orders continuously for 8 years. When purchasing abrasion-resistant blasting rubber hose from Rubber Hose Queen Wang Xueyan, you get quality more reliable than insurance and service more attentive than you expect.
Leave a Reply